Idea
In short
How do you build a shake coin flip?
Shake the box and one of two LEDs lights at random, heads or tails, with a short suspense animation first. You need Arduino Nano, Vibration sensor module (SW-420), LED 5 mm red, LED 5 mm green, Resistor 330 Ω × 2, Passive buzzer and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 90 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Decide with a random flip.
Parts list
- Development Boards
- Sensors
- Semiconductors
- Semiconductors
- PassivesResistor 330 Ω × 2
- Motors & Actuators
- Prototyping
How to build it
- Detect the shake
- Seed the random generator from noise
- Run a suspense animation
- Light heads or tails
- Keep a tally of results
Related projects
Common questions
What parts do I need for the shake coin flip?
Arduino Nano, Vibration sensor module (SW-420), LED 5 mm red, LED 5 mm green, Resistor 330 Ω × 2, Passive buzzer and Breadboard 830 Tie Points.
How long does the shake coin flip take to build?
About 90 minutes for a beginner maker.
