Projects / Ideas / Classroom CO2 and air quality log

Classroom CO2 and air quality log

IntermediateEnvironmentIdeaReviewed
In short

How do you build a classroom CO2 and air quality log?

Log CO2 and a VOC index through a lesson to see how fresh air changes the numbers. Indicative only, not a safety device. You need Arduino Nano, SGP30 air quality sensor, MH-Z19B CO2 sensor, MicroSD Card Module, DS3231 RTC module and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Log room air through a lesson.

How to build it

  1. Let both sensors warm up
  2. Log every minute
  3. Note when the room fills
  4. Open a window
  5. Plot the drop

Related projects

Common questions

What parts do I need for the classroom CO2 and air quality log?

Arduino Nano, SGP30 air quality sensor, MH-Z19B CO2 sensor, MicroSD Card Module, DS3231 RTC module and Breadboard 830 Tie Points.

How long does the classroom CO2 and air quality log take to build?

About 210 minutes for a intermediate maker.