Idea
In short
How do you build a round TFT dial gauge?
A round screen shows a needle gauge that follows a knob or sensor. You need ESP32 DevKit V1, 1.28 inch round TFT (GC9A01), Potentiometer 10 kΩ and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Draw a smooth analog dial.
Parts list
- Development Boards
- Displays
- Passives
- Prototyping
How to build it
- Wire the round display
- Draw a dial face
- Draw the needle by angle
- Read a knob
- Smooth the needle
Related projects
Common questions
What parts do I need for the round TFT dial gauge?
ESP32 DevKit V1, 1.28 inch round TFT (GC9A01), Potentiometer 10 kΩ and Breadboard 830 Tie Points.
How long does the round TFT dial gauge take to build?
About 270 minutes for a intermediate maker.
