Projects / Ideas / Random walk screen art

Random walk screen art

BeginnerDisplaysIdeaReviewed
In short

How do you build a random walk screen art?

A dot wanders across the screen by random steps and leaves a trail, drawing a different picture every time, with a knob for the step size and a button to clear. A gentle introduction to random numbers and drawing on a small screen. You need Arduino Nano, SSD1306 OLED Display, Potentiometer 10 kΩ, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

Level
Beginner
Time
About 60 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Draw art with a randomly wandering dot.

How to build it

  1. Start a dot in the middle
  2. Move it by a random step each time
  3. Leave a trail behind it
  4. Set the step size with a knob
  5. Clear the screen with a button

Related projects

Common questions

What parts do I need for the random walk screen art?

Arduino Nano, SSD1306 OLED Display, Potentiometer 10 kΩ, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

How long does the random walk screen art take to build?

About 60 minutes for a beginner maker.