Idea
In short
How do you build a two-wire data and power bus?
Send data and power over the same two wires at 12 V, like home bus systems. You need Arduino Nano × 2, MOSFET IRLZ44N, Resistor 1 kΩ × 2, Resistor 10 kΩ × 2, LM393 Comparator, Electrolytic Capacitor 100 µF, Inductor 1 mH and 12 V 2 A DC adapter.
- Level
- Advanced
- Time
- About 300 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Modulate data on a DC power line.
Parts list
- Development BoardsArduino Nano × 2
- Semiconductors
- PassivesResistor 1 kΩ × 2
- PassivesResistor 10 kΩ × 2
- Integrated Circuits
- Passives
- Passives
- Power
How to build it
- Feed 12 V through an inductor
- Pull the line down briefly to send bits
- Detect dips with a comparator
- Power the far node from the same line
- Find the speed limit
Common questions
What parts do I need for the two-wire data and power bus?
Arduino Nano × 2, MOSFET IRLZ44N, Resistor 1 kΩ × 2, Resistor 10 kΩ × 2, LM393 Comparator, Electrolytic Capacitor 100 µF, Inductor 1 mH and 12 V 2 A DC adapter.
How long does the two-wire data and power bus take to build?
About 300 minutes for a advanced maker.
