Idea
In short
How do you build a wi-Fi colour lamp?
A Pico W serves a tiny web page with three sliders that set the colour of an RGB LED lamp. Wi-Fi details stay in a separate file. You need Raspberry Pi Pico W, RGB LED 5 mm common cathode, Resistor 220 Ω × 3 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Control a lamp from a web page.
Parts list
- Development Boards
- Semiconductors
- PassivesResistor 220 Ω × 3
- Prototyping
How to build it
- Connect to Wi-Fi from a settings file
- Serve a simple page
- Read three slider values
- Set PWM for each colour
- Keep the page working on a phone
Common questions
What parts do I need for the wi-Fi colour lamp?
Raspberry Pi Pico W, RGB LED 5 mm common cathode, Resistor 220 Ω × 3 and Breadboard 830 Tie Points.
How long does the wi-Fi colour lamp take to build?
About 270 minutes for a intermediate maker.
