Idea
In short
How do you build a pico 2 W temperature page?
A small Wi-Fi board serves the room temperature on a simple page for your home network. Do not expose it to the internet. You need Raspberry Pi Pico 2 W, DHT22 Sensor, Resistor 10 kΩ and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Serve a temperature page.
Parts list
- Development Boards
- Sensors
- Passives
- Prototyping
How to build it
- Join your Wi-Fi
- Read the sensor
- Serve the page
- Refresh each ten seconds
- Show min and max
Common questions
What parts do I need for the pico 2 W temperature page?
Raspberry Pi Pico 2 W, DHT22 Sensor, Resistor 10 kΩ and Breadboard 830 Tie Points.
How long does the pico 2 W temperature page take to build?
About 210 minutes for a intermediate maker.
