Idea
In short
How do you build a raspberry Pi 5 LED chaser?
A Raspberry Pi 5 drives eight LEDs with gpiozero and chases a light along them, with patterns chosen from the keyboard. Shut down before changing any wiring. You need Raspberry Pi 5 (8 GB), LED 5 mm red × 8, Resistor 330 Ω × 8 and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 110 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Control eight LEDs from the Pi 5 header.
Parts list
- Single Board Computers
- SemiconductorsLED 5 mm red × 8
- PassivesResistor 330 Ω × 8
- Prototyping
How to build it
- Check the header numbering
- Wire eight LEDs with resistors
- Light one LED with gpiozero
- Chase along the row
- Choose patterns from the keyboard
Common questions
What parts do I need for the raspberry Pi 5 LED chaser?
Raspberry Pi 5 (8 GB), LED 5 mm red × 8, Resistor 330 Ω × 8 and Breadboard 830 Tie Points.
How long does the raspberry Pi 5 LED chaser take to build?
About 110 minutes for a beginner maker.
