Idea
In short
How do you build a pi Zero digital photo frame?
A tiny Pi shows a folder of photos on a small screen and changes picture every minute. You need Raspberry Pi Zero 2 W, 1.54 inch TFT (ST7789, 240x240), SanDisk microSD card 32 GB (A1, Class 10) and 5 V 2 A USB adapter.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Run a simple display program on boot.
Parts list
- Single Board Computers
- Displays
- SBC Accessories
- Power
How to build it
- Flash the operating system
- Enable SPI
- Install the display driver
- Write a slideshow script
- Start it on boot
Common questions
What parts do I need for the pi Zero digital photo frame?
Raspberry Pi Zero 2 W, 1.54 inch TFT (ST7789, 240x240), SanDisk microSD card 32 GB (A1, Class 10) and 5 V 2 A USB adapter.
How long does the pi Zero digital photo frame take to build?
About 210 minutes for a intermediate maker.
