Idea
In short
How do you build a bird nest box with camera and temperature?
A Pi Zero with a NoIR-style camera and IR LEDs watches a nest box day and night and logs box temperature without disturbing the birds. You need Raspberry Pi Zero 2 W, Arducam 5 MP OV5647 camera for Raspberry Pi, IR LED 850 nm (night vision) × 4, Resistor 100 kΩ, DS18B20 Temperature Sensor, Resistor 4.7 kΩ, SanDisk microSD card 32 GB (A1, Class 10) and 5 V 2 A USB adapter.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Stream video from a Pi and light the scene with infrared at night.
Parts list
- Single Board Computers
- SBC Accessories
- Optoelectronics
- Passives
- Sensors
- Passives
- SBC Accessories
- Power
How to build it
- Use a camera without an IR filter so it sees 850 nm light
- Light the box with four IR LEDs at low current
- Stream with rpicam-vid to your phone on the home Wi-Fi
- Log box temperature every 10 minutes
- Fit the box before the nesting season and never open it while birds nest
Related projects
Common questions
What parts do I need for the bird nest box with camera and temperature?
Raspberry Pi Zero 2 W, Arducam 5 MP OV5647 camera for Raspberry Pi, IR LED 850 nm (night vision) × 4, Resistor 100 kΩ, DS18B20 Temperature Sensor, Resistor 4.7 kΩ, SanDisk microSD card 32 GB (A1, Class 10) and 5 V 2 A USB adapter.
How long does the bird nest box with camera and temperature take to build?
About 180 minutes for a intermediate maker.
