Projects / Ideas / Dust level display

Dust level display

IntermediateEnvironmentIdeaReviewed
In short

How do you build a dust level display?

A particulate sensor shows PM2.5 and PM10 on a small display with a bar graph of the last hour. You need Arduino Nano, PMS5003 particulate matter sensor, SSD1306 OLED Display and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Read a serial particle sensor and plot history.

How to build it

  1. Read the sensor frames over serial
  2. Check the frame checksum
  3. Show PM2.5 and PM10
  4. Keep a rolling hour of data
  5. Draw a bar graph

Related projects

Common questions

What parts do I need for the dust level display?

Arduino Nano, PMS5003 particulate matter sensor, SSD1306 OLED Display and Breadboard 830 Tie Points.

How long does the dust level display take to build?

About 210 minutes for a intermediate maker.