Idea
In short
How do you build a nano 33 BLE Sense temperature beacon?
An Arduino Nano 33 BLE Sense Rev2 reads its own temperature and humidity sensors and advertises them over Bluetooth Low Energy so a phone app can read them without pairing. You need Arduino Nano 33 BLE Sense Rev2 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 130 min
- Parts
- 2
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Broadcast room readings over Bluetooth Low Energy.
Parts list
- Development Boards
- Prototyping
How to build it
- Read the on-board temperature sensor
- Read the humidity sensor
- Create a BLE service with two values
- Update the values every few seconds
- Read them with a phone BLE app
Common questions
What parts do I need for the nano 33 BLE Sense temperature beacon?
Arduino Nano 33 BLE Sense Rev2 and Breadboard 830 Tie Points.
How long does the nano 33 BLE Sense temperature beacon take to build?
About 130 minutes for a intermediate maker.
