Projects / Ideas / Gas sensor warm-up and drift log

Gas sensor warm-up and drift log

IntermediateEnvironmentIdeaReviewed
In short

How do you build a gas sensor warm-up and drift log?

Log two gas sensor modules from cold start for several hours to see the warm-up and drift. Indicative only, not a gas alarm and never a safety device. You need Arduino Nano, MQ-9 CO and flammable gas sensor module, MQ-8 hydrogen sensor module, MicroSD Card Module and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 180 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

See gas sensor warm-up behaviour.

How to build it

  1. Power the sensors and note the start time
  2. Read the raw values
  3. Log them to the card
  4. Plot the warm-up curve
  5. Compare after a day

Related projects

Common questions

What parts do I need for the gas sensor warm-up and drift log?

Arduino Nano, MQ-9 CO and flammable gas sensor module, MQ-8 hydrogen sensor module, MicroSD Card Module and Breadboard 830 Tie Points.

How long does the gas sensor warm-up and drift log take to build?

About 180 minutes for a intermediate maker.