Projects / Ideas / RS-232 level converter lab

RS-232 level converter lab

IntermediateCommunicationIdeaReviewed
In short

How do you build an RS-232 level converter lab?

A level converter chip lets a board talk to old RS-232 gear with its higher voltages, and you measure the levels on a meter. You need Arduino Nano, MAX232 RS-232 transceiver, Electrolytic capacitor 10 µF × 4, Digital multimeter and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 240 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Talk RS-232 safely.

Parts list

How to build it

  1. Read the datasheet capacitor values
  2. Wire the chip
  3. Measure the output levels
  4. Loop back transmit to receive
  5. Send a test message

Related projects

Common questions

What parts do I need for the RS-232 level converter lab?

Arduino Nano, MAX232 RS-232 transceiver, Electrolytic capacitor 10 µF × 4, Digital multimeter and Breadboard 830 Tie Points.

How long does the RS-232 level converter lab take to build?

About 240 minutes for a intermediate maker.