Projects / Ideas / 512-LED 3D cube with shift registers

512-LED 3D cube with shift registers

AdvancedLightingIdeaReviewed
In short

How do you build a 512-LED 3D cube with shift registers?

Five hundred and twelve LEDs, 74HC595 shift registers and layer MOSFETs make a big 3D display. You need Arduino Mega 2560 R3, LED 5 mm blue × 512, 74HC595 Shift Register × 8, IRF9540N P-channel MOSFET × 8, Resistor 220 Ω × 64, Resistor 1 kΩ × 8, Perfboard (dot PCB) 7 × 9 cm × 4 and IC socket DIP-8 / 14 / 16 / 28 / 40 × 8.

Level
Advanced
Time
About 1200 min
Parts
8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Drive a large LED array with shift registers and careful timing.

Parts list

How to build it

  1. Build a jig to solder straight layers
  2. Drive 64 columns with eight 595s
  3. Switch layers with P-MOSFETs
  4. Refresh at over 100 Hz
  5. Plan the current per layer

Related projects

Common questions

What parts do I need for the 512-LED 3D cube with shift registers?

Arduino Mega 2560 R3, LED 5 mm blue × 512, 74HC595 Shift Register × 8, IRF9540N P-channel MOSFET × 8, Resistor 220 Ω × 64, Resistor 1 kΩ × 8, Perfboard (dot PCB) 7 × 9 cm × 4 and IC socket DIP-8 / 14 / 16 / 28 / 40 × 8. LED 5 mm blue × 512: Buy a bag of 600.

How long does the 512-LED 3D cube with shift registers take to build?

About 1200 minutes for a advanced maker.