Projects / Ideas / Laser harp

Laser harp

IntermediateAudio & MusicIdeaReviewed
In short

How do you build a laser harp?

Seven laser beams hit seven LDRs, and breaking each beam plays a note through a DFPlayer or MIDI. You need Arduino Mega 2560 R3, Laser diode module 5 V (red, 650 nm) × 7, LDR Photoresistor × 7, Resistor 10 kΩ × 7, DFPlayer Mini MP3 module, Speaker 8 Ω 0.5 W and SanDisk microSD card 32 GB (A1, Class 10).

Level
Intermediate
Time
About 240 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Detect beam breaks reliably in a lit room.

Parts list

How to build it

  1. Align each laser on its LDR
  2. Calibrate light and dark levels
  3. Play a note when a beam breaks
  4. Stop the note when it returns
  5. Never look into the lasers

Related projects

Common questions

What parts do I need for the laser harp?

Arduino Mega 2560 R3, Laser diode module 5 V (red, 650 nm) × 7, LDR Photoresistor × 7, Resistor 10 kΩ × 7, DFPlayer Mini MP3 module, Speaker 8 Ω 0.5 W and SanDisk microSD card 32 GB (A1, Class 10).

How long does the laser harp take to build?

About 240 minutes for a intermediate maker.