Idea
In short
How do you build a doorbell that plays your message?
A recorder chip plays a recorded greeting when a visitor presses the doorbell button. You need Arduino Nano, ISD1820 voice recorder module, Tactile push button 6 mm and Speaker 8 Ω 0.5 W.
- Level
- Beginner
- Time
- About 60 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use a record and play module.
Parts list
- Development Boards
- Interfaces
- Switches
- Motors & Actuators
How to build it
- Record your message on the module
- Trigger playback from a pin
- Add a debounce and lockout
- Mount near the door
- Change the message by re-recording
Common questions
What parts do I need for the doorbell that plays your message?
Arduino Nano, ISD1820 voice recorder module, Tactile push button 6 mm and Speaker 8 Ω 0.5 W.
How long does the doorbell that plays your message take to build?
About 60 minutes for a beginner maker.
