Idea
In short
How do you build a spring constant experiment?
A time-of-flight sensor measures how far a spring stretches as you hang known masses on it, an encoder enters the mass, and a Pico plots force against extension and shows the spring constant. Use light masses and keep eyes clear of the spring. You need Raspberry Pi Pico H, VL53L0X time-of-flight distance sensor, Rotary encoder module (KY-040), SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 160 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Find a spring's constant by experiment.
Parts list
- Development Boards
- Sensors
- Sensors
- Displays
- Prototyping
How to build it
- Mount the spring above the sensor
- Measure the unloaded length
- Enter each mass with the encoder
- Record the extension
- Work out the constant from the slope
Common questions
What parts do I need for the spring constant experiment?
Raspberry Pi Pico H, VL53L0X time-of-flight distance sensor, Rotary encoder module (KY-040), SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the spring constant experiment take to build?
About 160 minutes for a intermediate maker.
