Projects / Ideas / Pulse-to-light ring

Pulse-to-light ring

IntermediateHealthIdeaReviewed
In short

How do you build a pulse-to-light ring?

A pulse sensor makes a LED ring glow in time with your pulse, for learning and fun, not for health use. You need Arduino Nano, MAX30102 pulse oximeter and heart rate sensor, WS2812B ring 16 LEDs and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 240 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Detect pulse peaks and animate lights.

How to build it

  1. Read the sensor
  2. Detect peaks
  3. Compute beats per minute
  4. Pulse the ring
  5. Note that it is not a medical device

Related projects

Common questions

What parts do I need for the pulse-to-light ring?

Arduino Nano, MAX30102 pulse oximeter and heart rate sensor, WS2812B ring 16 LEDs and Breadboard 830 Tie Points.

How long does the pulse-to-light ring take to build?

About 240 minutes for a intermediate maker.