Projects / Ideas / Four-bit adder demo

Four-bit adder demo

IntermediateDigital LogicIdeaReviewed
In short

How do you build a four-bit adder demo?

You add two four-bit numbers with switches and read the answer on LEDs, with a carry-out light. You need 74HC86 quad XOR gate × 2, 74HC08 quad AND gate × 2, 74HC32 quad OR gate, DIP switch 8-position, LED 5 mm red × 5, Resistor 220 Ω × 5 and Breadboard 830 Tie Points × 2.

Level
Intermediate
Time
About 330 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Learn binary addition on real gates.

Parts list

How to build it

  1. Plan the full adder
  2. Build one stage
  3. Chain four stages
  4. Add several test pairs
  5. Spot the carry ripple

Related projects

Common questions

What parts do I need for the four-bit adder demo?

74HC86 quad XOR gate × 2, 74HC08 quad AND gate × 2, 74HC32 quad OR gate, DIP switch 8-position, LED 5 mm red × 5, Resistor 220 Ω × 5 and Breadboard 830 Tie Points × 2.

How long does the four-bit adder demo take to build?

About 330 minutes for a intermediate maker.