Projects / Ideas / Plug-in sensor chain

Plug-in sensor chain

BeginnerLearningIdeaReviewed
In short

How do you build a plug-in sensor chain?

A feather board and two plug-in cables chain two sensors with no soldering and print both readings. You need Adafruit Feather RP2040, JST SH 1.0 mm cable (Qwiic / STEMMA QT) × 2, BME280 Environmental Sensor and SSD1306 OLED Display.

Level
Beginner
Time
About 90 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Chain sensors with plug-in cables.

How to build it

  1. Plug in the first sensor
  2. Plug in the second
  3. Scan the addresses
  4. Print both readings
  5. Show on the display

Related projects

Common questions

What parts do I need for the plug-in sensor chain?

Adafruit Feather RP2040, JST SH 1.0 mm cable (Qwiic / STEMMA QT) × 2, BME280 Environmental Sensor and SSD1306 OLED Display.

How long does the plug-in sensor chain take to build?

About 90 minutes for a beginner maker.