Projects / Ideas / Smart lamp with a new radio board

Smart lamp with a new radio board

IntermediateIoTIdeaReviewed
In short

How do you build a smart lamp with a new radio board?

Use an ESP32-C6 to learn about modern smart home radios by building a controllable low-voltage lamp. You need ESP32-C6 DevKitC-1, WS2812B addressable RGB LED strip (1 m, 60 LEDs), Electrolytic Capacitor 100 µF, Resistor 470 Ω and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 270 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Explore Zigbee and Thread style radios.

How to build it

  1. Set up the board support package
  2. Control a strip locally
  3. Read the radio documentation
  4. Join a test network if you have a hub
  5. Keep the project low voltage

Related projects

Common questions

What parts do I need for the smart lamp with a new radio board?

ESP32-C6 DevKitC-1, WS2812B addressable RGB LED strip (1 m, 60 LEDs), Electrolytic Capacitor 100 µF, Resistor 470 Ω and Breadboard 830 Tie Points.

How long does the smart lamp with a new radio board take to build?

About 270 minutes for a intermediate maker.