Idea
In short
How do you build an ESP32 weather card page?
An ESP32 reads a BME280 and serves a card with temperature, humidity and pressure, with a simple rising or falling pressure arrow. Readings are indicative only. You need ESP32 DevKit V1, BME280 Environmental Sensor, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 170 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Show a weather card with a pressure trend.
Parts list
- Development Boards
- Sensors
- Displays
- Prototyping
How to build it
- Read the BME280 over I2C
- Show the values on the OLED
- Store a pressure reading every ten minutes
- Compare with three hours ago
- Serve the card on a web page
Common questions
What parts do I need for the ESP32 weather card page?
ESP32 DevKit V1, BME280 Environmental Sensor, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the ESP32 weather card page take to build?
About 170 minutes for a intermediate maker.
