Projects / Ideas / Counter with a decoder display

Counter with a decoder display

BeginnerLearningIdeaReviewed
In short

How do you build a counter with a decoder display?

A CD4017 or microcontroller counter feeds a BCD decoder to count 0 to 9 on a seven-segment digit. You need NE555 Timer IC, CD4511 BCD to 7-segment decoder, Tactile push button 6 mm, Resistor 330 Ω × 7, Resistor 10 kΩ, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

Level
Beginner
Time
About 150 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Link counting, decoding and display.

How to build it

  1. Build a 555 clock
  2. Count with a counter
  3. Decode to seven segments
  4. Add manual step with a button
  5. Add a reset

Related projects

Common questions

What parts do I need for the counter with a decoder display?

NE555 Timer IC, CD4511 BCD to 7-segment decoder, Tactile push button 6 mm, Resistor 330 Ω × 7, Resistor 10 kΩ, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

How long does the counter with a decoder display take to build?

About 150 minutes for a beginner maker.