Verification of KVL and KCL
To verify Kirchhoff's voltage law in a series circuit and Kirchhoff's current law at a node.
Theory
KVL: around any closed loop, the algebraic sum of voltages is zero, so the supply equals the sum of the drops. KCL: the sum of currents entering a node equals the sum leaving it. In a parallel circuit, the supply current equals the sum of the branch currents.
Apparatus
- DC supply
- Resistors 1 kΩ, 2.2 kΩ, 3.3 kΩ
- Multimeter
- Breadboard
Circuit connections
- KVL: supply → R1 → R2 → R3 → back to supply
- KCL: R1, R2 and R3 each from the + node to −; measure each branch current and the total
Procedure
Pre-lab check
4 questions · 75% to be readyTry the readings before the lab
| Quantity | R1 | R2 | R3 | Sum | Check |
|---|---|---|---|---|---|
| Series: voltage drop (V) | 1.54 | 3.38 | 5.08 | 10 | = supply 10 V |
| Parallel: branch current (mA) | 10 | 4.55 | 3.03 | 17.58 | = total current |
Precautions
- Note the sign (polarity) of each reading.
- Measure currents by breaking the branch and inserting the meter.
My readings
Type what you measured. It goes into your record book, and to My Garage when you are signed in.
| S. No. | Quantity | R1 | R2 | R3 | Sum | Check |
|---|---|---|---|---|---|---|
| 1 | ||||||
| 2 | ||||||
| 3 | ||||||
| 4 | ||||||
| 5 | ||||||
| 6 |
Check my readings
Put the value you set in the first column, then compare. Real parts have tolerance.
Your lab record
Everything above is free. The print-ready write-up comes with Maker.
Printed pages leave the observation table empty for your own readings.
Viva practice
Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.
Quick answers for your record and viva
What is the aim of the verification of kvl and kcl experiment?
To verify Kirchhoff's voltage law in a series circuit and Kirchhoff's current law at a node.
What apparatus is needed for verification of kvl and kcl?
DC supply, Resistors 1 kΩ, 2.2 kΩ, 3.3 kΩ, Multimeter, Breadboard.
What is the theory behind verification of kvl and kcl?
KVL: around any closed loop, the algebraic sum of voltages is zero, so the supply equals the sum of the drops. KCL: the sum of currents entering a node equals the sum leaving it. In a parallel circuit, the supply current equals the sum of the branch currents.
What result should I get in verification of kvl and kcl?
Sum of voltage drops = ___ V ≈ supply voltage (KVL verified). Sum of branch currents = ___ mA ≈ total current (KCL verified).
What precautions should I take in verification of kvl and kcl?
Note the sign (polarity) of each reading. Measure currents by breaking the branch and inserting the meter.
