Lab / KTU / Electronic devices / Experiment 6

Frequency response of a common-emitter amplifier

Electronic devicesVirtual readings4 viva questionsRecord book ready
Aim

To design a voltage-divider biased CE amplifier and plot its frequency response to find mid-band gain and bandwidth.

Apparatus
  • Transistor BC547
  • Resistors for biasing (e.g. R1 47 kΩ, R2 10 kΩ, RC 2.2 kΩ, RE 470 Ω)
  • Capacitors 10 µF (coupling), 100 µF (bypass)
  • Function generator
  • CRO
  • DC supply 12 V
Av ≈ 48

Theory

The CE amplifier gives a phase-inverted output with gain Av ≈ −RC / re′ (with RE bypassed). At low frequencies the coupling and bypass capacitors reduce the gain; at high frequencies the transistor's internal capacitances do. The bandwidth is the range between the lower and upper −3 dB frequencies: BW = fH − fL.

Read the lesson: Mosfet switching ›
Circuit connections
  • 12 V → R1 → base → R2 → ground; 12 V → RC → collector; emitter → RE → ground with CE across it
  • Input through 10 µF to the base; output through 10 µF from the collector

Procedure

Pre-lab check

4 questions · 75% to be ready
1Why is the output of a CE amplifier inverted?
2What does the bypass capacitor do?
3Why does gain fall at low frequencies?
4Why voltage-divider bias?

Try the readings before the lab

Calculated, not measured. In the lab, write down your own readings.
Bandwidth fH − fL299.92 kHz
Mid-band gain40 dB
011223243102345.5k128.2k3000.0kf (Hz, log)Gain (dB)
f (Hz)GainGain (dB)
1012.421.9
3136.631.3
9977.837.8
31296.939.7
98199.740
308710040
971799.940
3058099.540
9624195.239.6
30288770.436.9
9532383029.5
30000001020

Precautions

  • Keep the input small enough that the output is not clipped.
  • Check the bias point before applying a signal.

My readings

Type what you measured. It goes into your record book, and to My Garage when you are signed in.

S. No.f (Hz)GainGain (dB)
1
2
3
4
5
6

Check my readings

Put the value you set in the first column, then compare. Real parts have tolerance.

Open my record book
Result

Mid-band gain = ___ (___ dB), fL = ___ Hz, fH = ___ kHz, bandwidth = ___ kHz.

Everything above is free. The print-ready write-up comes with Maker.

Printed pages leave the observation table empty for your own readings.

Viva questions

Say your answer out loud first, then check. The first 2 answers are free; Maker opens all 4.

1. Why is the output of a CE amplifier inverted?
2. What does the bypass capacitor do?
3. Why does gain fall at low frequencies?
4. Why voltage-divider bias?

Quick answers for your record and viva

What is the aim of the frequency response of a common-emitter amplifier experiment?

To design a voltage-divider biased CE amplifier and plot its frequency response to find mid-band gain and bandwidth.

What apparatus is needed for frequency response of a common-emitter amplifier?

Transistor BC547, Resistors for biasing (e.g. R1 47 kΩ, R2 10 kΩ, RC 2.2 kΩ, RE 470 Ω), Capacitors 10 µF (coupling), 100 µF (bypass), Function generator, CRO, DC supply 12 V.

What is the theory behind frequency response of a common-emitter amplifier?

The CE amplifier gives a phase-inverted output with gain Av ≈ −RC / re′ (with RE bypassed). At low frequencies the coupling and bypass capacitors reduce the gain; at high frequencies the transistor's internal capacitances do. The bandwidth is the range between the lower and upper −3 dB frequencies: BW = fH − fL.

What result should I get in frequency response of a common-emitter amplifier?

Mid-band gain = ___ (___ dB), fL = ___ Hz, fH = ___ kHz, bandwidth = ___ kHz.

What precautions should I take in frequency response of a common-emitter amplifier?

Keep the input small enough that the output is not clipped. Check the bias point before applying a signal.

Frequency response of a common-emitter amplifier