Projects / Voltage doubler / Fault finder

Fault finder: Voltage doubler

6 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 6 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 6

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Output low: what should I check?

Check diode direction and capacitor values.

No oscillation: what should I check?

Check the 555 wiring.

Capacitor gets warm: what should I check?

Reduce the load.

Output wobbles: what should I check?

Increase the output capacitor.