Fault finder: Voice memo recorder
7 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Quiet playback: what should I check?
Speaker too small or battery weak. Use fresh cells.
Distorted voice: what should I check?
Too close to the microphone. Speak from 20 cm.
Nothing plays: what should I check?
Message was not recorded. Hold REC the whole time.
Module gets hot: what should I check?
Voltage too high. Use 3 V.
