Fault finder: Meeting room status light

8 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.

0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8

ESP32 supply pin

Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Random colours: what should I check?

Common ground missing or the data resistor is absent.

Nothing lights: what should I check?

Check DIN, not DOUT, is connected and the matrix has 5 V.

No updates: what should I check?

Check the Wi-Fi details and the page address.

Board resets at full brightness: what should I check?

Keep brightness at or below 30 and use a 2 A adapter.