Fault finder: Atari Punk Console noise synth

8 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No sound: what should I check?

Check supply on pins 14 and 7 and the amplifier connections.

Constant buzz, no variation: what should I check?

Pot 2 is at minimum so the pulse never ends. Turn it.

Hum or whine: what should I check?

Add decoupling, 100 nF across the supply, and keep wires short.

Distorted: what should I check?

Lower the amplifier's volume or gain.