Fault finder: 360° photo turntable

7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Motor only buzzes: what should I check?

The coil order is wrong; use 8, 10, 9, 11.

Plate drifts: what should I check?

Check the 2048 step count and no slipping on the shaft.

No Bluetooth text: what should I check?

Check the divider and swap TX and RX.