Fault finder: State machine vending model

10 checks for this build on the Uno. Work from the top: power first, then each part, then the code.

0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10

Uno supply pin

Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Presses repeat: what should I check?

Increase the debounce time.

Servo jitters: what should I check?

Add the capacitor or power it separately.

LCD blank: what should I check?

Try address 0x3F and adjust the contrast.

Wrong item bought: what should I check?

Check D3 and D4 wiring.