Fault finder: Solar phone charger for a backpack

5 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No charging light: what should I check?

Check panel polarity and the sun angle.

Phone will not charge: what should I check?

Check the boost module's switch or button.

Very slow: what should I check?

Panels need direct sun and an angle facing it.

Cell very warm: what should I check?

Disconnect and check for a short.