Fault finder: Voice-style multi kitchen timers
8 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Blank LCD: what should I check?
Try address 0x3F and adjust the contrast.
Encoder skips: what should I check?
Change the divisor of 4 to match your encoder.
Wrong beeps: what should I check?
Check the timer number mapping.
Time runs off: what should I check?
Use an RTC for long timers.
