Projects / NFC tag door lock / Fault finder

Fault finder: NFC tag door lock

6 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.

0 of 6 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 6

ESP32 supply pin

Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Reader not found: what should I check?

Check the I2C switches and wiring.

Lock does not move: what should I check?

Check the 12 V supply and the diode direction.

Adds the wrong tag: what should I check?

Tap the master first and wait for the double beep.