Fault finder: Function generator with DDS
12 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 12 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 12
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
No output: what should I check?
Check FSYNC and that the module has power.
Wrong frequency: what should I check?
Check the module crystal frequency.
Distorted wave: what should I check?
Use a high-impedance load.
