Fault finder: Johnson counter light chaser
8 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Odd pattern after power up: what should I check?
The register started in an invalid state. Power cycle or add a reset button.
Nothing happens: what should I check?
Check the clock. The 555 may not reach the 595.
LEDs only half work: what should I check?
A 330 Ω resistor or LED is backwards.
Pattern is one step late: what should I check?
SRCLK and RCLK share an edge, so the output lags by one clock. That is normal.
