Projects / RGB colour mixer / Fault finder

Fault finder: RGB colour mixer

9 checks for this build on the Uno. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Uno supply pin

Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Colours inverted: what should I check?

Common-anode LED: long leg to 5V and invert the values.

One colour never lights: what should I check?

Wrong leg order: check the pinout with a meter on diode mode.

Flicker: what should I check?

Normal at very low values; keep values above about 5.