Fault finder: RFID class attendance with SD card

9 checks for this build on the Uno. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Uno supply pin

Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

SD error: what should I check?

Format as FAT32 and check the chip select.

Reader not found: what should I check?

Check 3.3 V and the SS wire.

Wrong time: what should I check?

Set the RTC from the example sketch.