Fault finder: Reverse parking sensor

9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Random beeps with nothing behind: what should I check?

The sensor may be catching the bumper or the tow bar. Aim it slightly down and away.

Readings are zero: what should I check?

Check TRIG and ECHO are not swapped and the sensor has 5 V.

The Nano resets when the engine starts: what should I check?

Supply noise. Add a 470 µF capacitor on the LM2596 output.

It does not work in heavy rain: what should I check?

Water on the face of the sensor can cause false readings. Dry it or wipe it.