Fault finder: Resistor mystery box
5 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Readings drift: what should I check?
Power is still connected, remove it.
Rab smaller than expected: what should I check?
A hidden wire shorts two arms.
Solved value is negative: what should I check?
Check which reading is which pair.
Small resistor has a large error: what should I check?
The meter lead resistance matters, short the leads first.
Terminal readings do not match: what should I check?
Check each resistor is joined at the centre point.
