Fault finder: Relay module lab at 12 V

7 checks for this build on the Uno. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Uno supply pin

Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No click: what should I check?

Check the 5 V and GND to the relay board.

Clicks but no light: what should I check?

Check the COM and NO wiring and the adapter.

Uno resets when it clicks: what should I check?

Power the Uno separately from USB and keep wires apart.

Strip stays on: what should I check?

Check you used NO and not NC.