Fault finder: Queue token display
10 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
No packets: what should I check?
Add the 10 µF capacitor and check CE and CSN pins.
Display blank: what should I check?
Check DIN, CLK, CS and the intensity.
No sound: what should I check?
Check the SD card format and the file names.
Misses presses: what should I check?
Move the units closer or raise the radio power level.
