Fault finder: Fuse and polyfuse lab

5 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Nothing blows: what should I check?

Raise the current or wait longer.

Supply trips: what should I check?

Check it is in constant-current mode.

Readings vary: what should I check?

Start each fuse cold.

Holder gets hot: what should I check?

Stop and let everything cool.