Fault finder: Persistence-of-vision wand

7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Letters look mirrored: what should I check?

Wave the other way, or reverse the column order.

Nothing shows: what should I check?

Check the tilt switch wires and that it changes when shaken.

One LED dark: what should I check?

Check the leg direction and the resistor.

Letters upside down: what should I check?

Put LED 1 at the other end of the stick.

Restarts in the middle: what should I check?

Lengthen the lockout time.