Fault finder: Plant grow shelf timer
9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Relays reversed: what should I check?
Change active LOW to HIGH for your board.
Time resets to the compile time: what should I check?
Replace the RTC coin cell.
Fan never runs: what should I check?
Check the wiring to NO, not NC.
Nano resets when the lights switch: what should I check?
Use separate supplies and add a 100 µF capacitor.
