Fault finder: Motion night light
10 checks for this build on the Uno. Work from the top: power first, then each part, then the code.
0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10
Uno supply pin
Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Light never comes on: what should I check?
Lower the room light or raise DARK_BELOW.
Comes on in daylight: what should I check?
Lower DARK_BELOW, check the LDR divider.
Random triggers: what should I check?
Move away from heat sources and shield from sunlight.
Light stays on forever: what should I check?
The PIR delay screw is too high, turn it down.
LEDs flicker: what should I check?
Check connections on D9, D10 and D11.
