Fault finder: Pico eight-knob bank on one analog pin

7 checks for this build on the Pico. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Pico supply pin

Plug the Pico into USB. Black probe on a GND pin, red probe on the 3V3(OUT) pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Values leak between knobs: what should I check?

Increase the settle time or read twice before averaging.

All values the same: what should I check?

Check the select lines and the common pin.

Values stuck at zero: what should I check?

Check VCC, E to GND and VEE to GND.

Noisy readings: what should I check?

Add 100 nanofarad from GP26 to GND.

Chip warm: what should I check?

Check VEE and VCC are not swapped.