Fault finder: Pi melody doorbell button

7 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No sound: what should I check?

Check the buzzer is passive and wired to pin 12.

Out of range error: what should I check?

TonalBuzzer limits notes to about C3 to B6, adjust the numbers.

Notes wobble: what should I check?

Close other programs, software PWM depends on the load.

Long press not recognised: what should I check?

Hold for a full second.

Button does nothing: what should I check?

Check pin 11 and ground.