Fault finder: Pi AirPlay and Spotify receiver

7 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

aplay shows no card: what should I check?

Check the overlay line and the wiring.

No sound: what should I check?

Check output_device in the shairport-sync config.

Crackles: what should I check?

Use a better power supply and a short audio cable.

Not visible on the phone: what should I check?

Phone and Pi must be on the same network.